808 products
IC-Loc Red Permanant thread lock BSI 10ml
$13.95
BSI's IC-Loc threadlockers are anaerobic adhesives that cure in the absence of air, which occurs as a threaded fastener is tightened. They prevent the loosening of fasteners due to shock or vibration. Full strength is reached in 1-3 hours. IC-Loc is not compatible with most plastics. For best results, all...
Insta-Cure Super Thin CA Glue 1oz
$13.50
INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs...
Insta-Cure Super Thin CA Glue 2oz
$19.95
INSTA-CURE has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs...
Insta-Cure+ Gap Filling 1oz CA Glue Medium
$13.50
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints...
Insta-Cure+ Gap Filling 2oz CA Glue Medium
$19.95
INSTA-CURE+ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints...
Insta-Set CA Accelerator 2oz BSI
$14.95
INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead...
Insta-Set CA Accelerator 8oz BSI
$24.50
INSTA-SET is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead...
Lobular Red Sandalwood Timber Pen Blank
$6.50
Lobular Red Sandalwood Timber Pen Blank
20mm x 20mm x 130mm
Locking Grip Pliers For Pen Dissembly
$15.95
If you have ever had to disassemble a pen you know the hassle it can be. This tool makes it easy. It holds fast and never leaves a mark. The non-marring soft grip securely grasps finished tubes from 8.89mm through 25.4mm diameter. For best results, use with our pen disassembly...
Long Series 155mm Tin Coated Twist Drills Set- 6.8, 6.9 and 7mm by Rotur
$23.85
Quality Rotur UK made Set of drills 6.8, 6.9, 7mm tin coated drills these bits are 155mm long.
Mandrel 2MT with Bushing 3/8-16 from SSBS USA
$28.50
Description Universal Mandrels Universal Mandrels come in various sizes for different spindles. The “turn to diameter” is set for our Honey Dippers but unlike our BSM mandrels they accept our bushings to change the “turn to diameter”. Can be used with or without bushings depending on the project. Precision machined...
Maui Diamond Acrylic Diamond Infused Pen Blanks
$17.50
The Diamond Infused Maui custom pen blanks instantly take you to the edge of a sandy shoreline. These swirling natural blues, greys, and teals will bring a calmness while making it your new favorite pen blank.
MaterialsEpoxy Resin/Acrylic
Dimensions0.86 in diameter6 ' in length
Maxi-Cure / Insta-Set Combo Pack BSI
$23.90
Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded...
Maxi-Cure Extra Thick CA Glue 1oz BSI
$13.50
MAXI-CURE extra thick CA is the best CA for most plastics, including GE?s Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded...
Maxi-Cure Extra Thick CA Glue 2oz BSI
$19.95
MAXI-CURE extra thick CA is the best CA for most plastics, including GE?s Lexan MAXI-CURE is the best choice for plastic model assembly. When used with INSTA-SET, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded...
Mica Pigment 1# Golden green
$6.50
The initial range of 54 products are packed in a 25gm container ready for easy storage and help minimise mess & repacking.
These Mica’s are great for a number of resin’s including epoxy resin & polyester resin.
Mica Pigment 10# Peach
$6.50
The initial range of 54 products are packed in a 25gm container ready for easy storage and help minimise mess & repacking.
These Mica’s are great for a number of resin’s including epoxy resin & polyester resin.
Mica Pigment 11# Rose red
$6.50
The initial range of 54 products are packed in a 25gm container ready for easy storage and help minimise mess & repacking.
These Mica’s are great for a number of resin’s including epoxy resin & polyester resin.
Mica Pigment 12# Mauve
$6.50
The initial range of 54 products are packed in a 25gm container ready for easy storage and help minimise mess & repacking.
These Mica’s are great for a number of resin’s including epoxy resin & polyester resin.
Mica Pigment 13# Orange
$6.50
The initial range of 54 products are packed in a 25gm container ready for easy storage and help minimise mess & repacking.
These Mica’s are great for a number of resin’s including epoxy resin & polyester resin.
Mica Pigment 15# Rich Gold
$6.50
The initial range of 54 products are packed in a 25gm container ready for easy storage and help minimise mess & repacking.
These Mica’s are great for a number of resin’s including epoxy resin & polyester resin.
Mica Pigment 16# Magic Yellow
$6.50
The initial range of 54 products are packed in a 25gm container ready for easy storage and help minimise mess & repacking.
These Mica’s are great for a number of resin’s including epoxy resin & polyester resin.
Mica Pigment 18# Gold
$6.50
The initial range of 54 products are packed in a 25gm container ready for easy storage and help minimise mess & repacking.
These Mica’s are great for a number of resin’s including epoxy resin & polyester resin.
Mica Pigment 2# Apple Green
$6.50
The initial range of 54 products are packed in a 25gm container ready for easy storage and help minimise mess & repacking.
These Mica’s are great for a number of resin’s including epoxy resin & polyester resin.
Mica Pigment 20# Brown
$6.50
The initial range of 54 products are packed in a 25gm container ready for easy storage and help minimise mess & repacking.
These Mica’s are great for a number of resin’s including epoxy resin & polyester resin.
Mica Pigment 21# Wine Red
$6.50
The initial range of 54 products are packed in a 25gm container ready for easy storage and help minimise mess & repacking.
These Mica’s are great for a number of resin’s including epoxy resin & polyester resin.
Mica Pigment 22# Bronze
$6.50
The initial range of 54 products are packed in a 25gm container ready for easy storage and help minimise mess & repacking.
These Mica’s are great for a number of resin’s including epoxy resin & polyester resin.